Wire Rope Pulling Hoist

The OKA pulling hoist is one kind of versatile and portable unit for pulling, lifting, lowering, spanning and securing loads over long distances.It comes in three sizes with capacities of 800, 1600 and 3200 kg. It is light, easy and safe to operate. Overload protecion provides high labour safety:the forward lever has built-in shearing pin,which will shear at approx.25% overload. The broken pin,however,can be replaced without removing the load. The OKA  pulling hoist requires minimum maintenance and is easy to service.The large opening in the top of the housing allows easy and quick cleaning of the unit with water,even hard caked mud can usually be flushed out.Then simply apply motor oil for lubrication and the OKA is ready again for use. The OKA uses a special wire rope with steel core . Only this special wire rope will ensure proper functioning. The standard OKA  pulling hoist includes the operating lever and 20m or 10m length of wire rope mounted on a reel.The wire rope is fitted with a safety hook at one end,and is tapered at the other end for easy access into the unit.Longer rope lengths and a large variety of accessories are available on request. HOIST & ACCESSORIES     PULLING HOIST (Safety factor: 5:1) ITEM NO(ALUMINIUM BODY) 01302 01302 01303 ITEM NO(STEEL BODY) 01307A 01308A 01309A Rated Capacity (kg) 800 1600 3200 Rated Forward Handpower (N) 343 441 441 Rated Forward Travel (N) >=52 >=55 >=28 Rope Diameter (mm) 8.3 11 16 Wire Rope Safety Factor Load Capacity 5 5 5 Safety Factor & Static Load Capacity 4 5 4 5 4 5 Max. Travelling Load (kg) 1200 2400 4000 Max Overall Size(mm) A 426 440 545 550 660 690 B 235 265 280 300 325 350 C 168 / 190 / 230 / D 60 63 72 77 91 91 E 64 / 97 / 116 / L1 / 80 80 L2 80 120 120